Overview
The Ref 19P Induna Metal Driveway Gate is a durable and affordable option for securing residential driveways. With a fixed swing design and a built-in pedestrian door, it offers a balance of strong physical deterrence and everyday convenience.Coated for improved weather resistance, this gate is built to handle New Zealand’s conditions with minimal upkeep. For homeowners wanting reliable driveway security without the cost of custom fabrication, the Induna provides a practical and long-lasting solution.
Top Features
- Width: 3000mm | Height: 2000mm
- Material: Mild steel, zinc plated & epoxy coated
- Locking: Shootbolt & L302 lever locks
- Integrated pedestrian door for easy access
Key Strengths
- Strong Visual & Physical Deterrent:
Built from sturdy mild steel, this gate provides a clear barrier against unauthorised access while discouraging intruders. - Convenient Pedestrian Access:
Includes a small integrated entry door, allowing daily use without the need to open the entire driveway gate. - Weather-Resistant Coating:
Zinc plating and epoxy coating help protect against New Zealand’s coastal humidity and wind, extending service life with proper care. - Affordable Residential Security:
Designed as a cost-effective solution for home and lifestyle property driveways where both access and security are needed.
Applications
- Residential homes
- Lifestyle blocks
- Light-use driveways and entrances
What’s Included
- Driveway gate panels (mild steel, zinc plated + epoxy coated)
- Lever locks & shootbolt
- Integrated pedestrian door
- Note: Fixings and hinges not included. Hinge space requirement: 60mm (total).
Installation Guide
Step 1: Gather The Tools You'll Need
- Measuring tape📏
- Pencil or marker✏️
- Spirit level📐
- Drill🪛
- Fixings: Screws and wall plugs🔩 (included)
- Spanner or wrench🔧
- Screwdriver🪛
- Hammer🔨
- Protective gloves🧤 (optional)
Step 2: Measure the Installation Area
Begin by measuring the width and height of the doorway or area where the gate will be installed. Ensure there is enough clearance on both sides for the gate to fully retract. Mark the position on the wall where the top track will be installed.
Step 3: Position the Top Track
Hold the top track at your marked position. Use a spirit level to ensure it is perfectly straight. Once aligned, mark the screw holes on the wall for drilling.
Step 4: Drill the Holes
Using your drill, create holes at the marked points on the wall. If necessary, insert wall plugs to ensure a strong hold.
Step 5: Attach the Top Track
Secure the top track to the wall by screwing it into place. Ensure it is straight and properly aligned.
Step 6: Mount the Side Guides
- Place the gate in the open position, aligning it with the top track. Attach the side guide channel to the wall, making sure the gate retracts and extends smoothly.
- Mark the screw holes for the side guides and drill holes accordingly.
- Secure the side guides with screws, making sure they are tightly fixed.
*The retractable gate in these images has a dark blue track and panel, which is a custom design option by Xpanda Security. DIY Xpanda's standard retractable gates are available in white.
Step 7: Install the Bottom Track
- If the gate includes a bottom track, position it along the floor where the gate will rest when closed.
- Mark and drill the necessary holes in the floor, then secure the bottom track with screws.
Step 8: Test the Gate
- Open and close the gate to ensure it retracts smoothly along the top and bottom tracks.
- Make any necessary adjustments to the alignment to ensure proper operation.
Step 9: Locking Mechanism Installation
- Install the locking mechanism as indicated in the gate’s manual. Attach the handle or lock on the gate at a convenient height.
- Secure the lock plate on the wall or floor to match the lock position of the gate.
Step 10: Final Adjustments
- Check all screws to ensure they are securely fastened.
- Make sure the gate opens and closes properly and locks securely.
CUSTOM ORDER?
