How to Install Window Security Bars

A Step-by-Step Guide of How to Install DIY Xpanda's Expandable Window Security Bars

Expandable window security bars are highly effective DIY security solutions against burglaries and trespassers. While these expandable window security bars are often favored by repair and maintenance professionals and DIY enthusiasts, many customers feel hesitant to install them on their own.

In this blog, I would like to alleviate these concerns by providing a step-by-step guide on how to install expandable window bars efficiently. 

The average time of installation is about 30 minutes to 1 hour.

Don't worry, just 7 steps!

Step 1: Measure Inside Your Window Frame
Step 2: Gather Your Tools and Materials
Step 3: Mark the Mounting Points
Step 4: Drill the Holes
Step 5: Attach the Mounting Brackets
Step 6: Install the Bars
Step 7: Test the Security

Step 1: Measure Inside Your Window Frame

First things first, let's measure the inside of your window frame.

Particularly inside the window frame's reveal. 

This step is super important because it will help you decide whether to install the bars vertically, horizontally, or even use multiple bars side-by-side. Take your time with this part—no need to rush. Think about which windows or doors you want to secure the most to protect your home.

Also, to retain rigidity in the middle of the bars, do not exceed the maximum expanded width/height.
So if you have a window size that is 900mm width by 900 mm width, you would not want to choose the window bar that extends to 900 or 905mm, rather choose that extends to something like 1100mm or 1650mm.

<Round or Square Bars>

One thing to note, if you are choosing square bars, you can install the expanding window security bars on top of the frame / reveal in addition to installing them inside the frame (window sill)

<Round Expandable Bars>

• 3 Round Shape Expandable Window Security Bars A 340mm (W) 485-900mm (H)

• 3 Round Shape Expandable Window Security Bars B 340mm (W) 900-1650mm (H)

<Square Expandable Bars>

• 3 Square Shape Expandable Window Bars C 300mm (W) 630-1100mm (H)

• 4 Square Shape Expandable Window Bars D 420mm (W) 630-1100mm (H)
  

• 5 Square Shape Expandable Window Bars E 540mm (W) 630-1100mm (H)

Step 2: Gather Your Tools and Materials

Before we get started, let's make sure we have everything we need.
Here’s a list of tools and materials:

• DIY Xpanda expandable window security bars
• Measuring tape
• Pencil or marker
• Drill with the right drill bits
• Screws and anchors (included in the expandable window security bars)
• Screwdriver
• Level

 

Step 3: Mark the Mounting Points

Using your measurements from Step 1, mark the spots on the window frame where you’ll drill the holes for the mounting brackets. Make sure the marks are level and evenly spaced. Double-checking your marks now will save you from any hassles later on.

Step 4: Drill the Holes

Now, it’s time to drill the holes. Be gentle and precise, using the marks as your guide. If you’re drilling into a tougher surface like masonry or concrete, use the appropriate drill bit and anchors. Take it slow and steady.

Step 5: Attach the Mounting Brackets

Next, attach the mounting brackets to the window frame with the screws and anchors. Make sure they’re nice and tight. The brackets need to be stable to keep the expandable window bars secure.

Step 6: Install the Expandable Window Security Bars

Expand the window security bars to fit the width of your window frame. Place them into the mounting brackets and make sure they’re aligned properly. Tighten any adjustment screws or bolts to lock the bars in place.

Here are more detailed breakdowns of how to screw the expandable window security bars:
https://www.youtube.com/watch?v=JGdsgqaYNW4

Step 7: Test the Security

Give the expandable window security bars a gentle push and pull to check their stability. They should be firmly in place without any wobbling. If they feel loose, tighten the brackets or adjustment screws a bit more. 
Make any last adjustments to ensure everything is just right.
Check all screws and brackets to make sure they’re tight, and clean up any debris from the installation.

All good?

Now, you have successfully installed DIY Xpanda's expandable window security bars.

Here is a written instruction which is also available on product pages.

If you have a window that is bigger than any of DIY Xpanda's expandable window bars, you can always consult with our business partner Xpanda Security. They will take care of designing, manufacturing, and installing custom-mad security window bars.

Feel free to hit us with any questions at any time. We will find you the best security solution for your unique situation.

Installation Instruction and Demonstration Video Link: https://www.youtube.com/watch?v=JGdsgqaYNW4